Rotork generates actuator solution for UAE oilfield project
Published by Stephanie Roker,
Editor
World Pipelines,
Rotork has received an order for 220 pneumatic actuators for the NASR Phase II full field development project in the UAE. The aim of the project is to increase the field's oil production capacity to 65 000 bpd from the existing capacity of 22 000 bpd.
Awarded by Hyundai Heavy Industries, the order included spring-return pneumatic actuators to operate 30 in. and 36 in. Class 1500 ball valves, with the specification that the maximum actuator output torque at a design pressure of 9.4 bar should not be in excess of 90% of the valves’ maximum allowable stem torque (MAST).
Due to the huge force required to compress the spring, this requirement is beyond the performance limits of the standard range of Rotork GP pneumatic actuators. However, faced with this challenge, the Rotork Research & Development department successfully created an innovative and simple solution. Rotork engineers added a second pneumatic cylinder, mounted between the GP scotch yoke centre body and the spring-return cylinder. Both cylinders are pressurised in the same direction at the same time, so one delivers torque for valve movement, satisfying the valve MAST requirement, whilst the other independently applies the torque to compress the spring.
The resulting actuator is the largest GP350 actuator built to-date, with a total length of 8.5 m and weighing 19 t.
Read the article online at: https://www.worldpipelines.com/business-news/17082017/rotork-generates-actuator-solution-for-uae-oilfield-project/
You might also like
Decouplers making a difference
Jay Warner, Dairyland Electrical Industries, USA, Jerzy Sibila and Jerzy Mossakowski, CORRSTOP, Poland, explain how AC mitigation is a proven technique to solve AC interference problems on pipelines, referring specifically to the use of DC decouplers.