Skip to main content

STATS Group awarded Theddlethorpe gas isolation project

World Pipelines,

Oil and gas engineering specialist, STATS Group, has completed a pipeline isolation project at Theddlethorpe gas terminal in Lincolnshire, UK on behalf of Wood Group PSN and Conoco Phillips.

STATS technicians deployed its patented BISEP™ isolation technology to allow the replacement of a blow-down valve in an environment of extreme temperature ranges.

The workscope included installing and strength testing a 6 x 6 in. hot tap clamp, grouting the void between the clamp and pipeline to reduce corrosion issues and installing a full bore 6 in. 300# ball isolation valve, which was left in-situ post completion.

A hot tap machine was installed and tested to confirm pressure integrity before the hot tap was performed and the BISEP deployed to isolate the pipe and allow recovery and replacement of the blow-down valve.

STATS Project Manager Steve Gardiner said: “Our technicians had to overcome grouting and hydro testing problems associated with the low temperatures onsite but the project was completed on schedule and within a four week time frame.

“The pipeline temperature made the selection of suitable materials challenging but working alongside our seal suppliers, a material was identified that would perform well in the extreme temperature ranges identified by the client (-29 °C to 32 °C).

“Our tools allow dual seal isolation of a pipeline through a single entry point and an increasing number of clients are discovering the benefits of this unique isolation technology.”

STATS Group supplies a range of products and services for piping and pipeline isolation, intervention, inspection, repair, connection and testing workscopes. All products in the STATS portfolio is designed, manufactured, assembled and tested in-house at the company’s purpose built headquarters and workshop at Kintore, near Aberdeen, Scotland.

Adapted from press release by Cecilia Rehn

Read the article online at:

You might also like


Embed article link: (copy the HTML code below):